International
1. Whan Lee, Seyed Mohammad Mehdi Sajadieh, Hye Kyung Choi, Jisoo Park and Sang Do Noh, "Application of Reinforcement Learning to Dyeing Processes for Residual Dye Reduction", International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 12, pp.1-21 (2024).
2. Seyed Mohammad Mehdi Sajadieh and Sang Do Noh, "Towards Sustainable Manufacturing: A Maturity Assessment for Urban Smart Factory", International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 11, pp.1-29 (2024).
3. Goo-Young kim, Jongpil Yun, Changha Lee, Junwoo Lim, Yongjin Kim, and Sang Do Noh, "Data-driven Analysis and Human-centric Assignment for Manual Assembly Production Lines", Journal of Computers & Industrial Engineering, Vol. 188, 109896 (2024).
4. Kyu Tae Park, Yang Ho Park, Moon-Won Park, and Sang Do Noh, "Architectural Framework of Digital Twin-based Cyber-Physical Production System for Resilient Rechargeable Battery Production", Journal of Computational Design and Engineering, Vol.10 No. 2, 809-829 (2023).
5. Donggun Lee, Chong-Keun Kim, Jinho Yang, Kang-Yeon Cho, Jonghwan Choi, Sang-Do Noh, and Seunghoon Nam, “Digital Twin based Analysis and Optimization for Design and Planning of Production Lines”, Machines, Vol. 10 No. 12:1147 (2022).
6. Seung-Woo Jeon, Donggun Lee, Seog-Chan Oh, Kyu Tae Park, Sang Do Noh, and Jorge Arinez, “Design and Implementation of Simulation-based Scheduling System with Reinforcement Learning for Re-entrant Production Lines”, Machines, Vol. 10 No. 12:1169 (2022).
7. Seyed Mohammad Mehdi Sajadieh, Yoo Ho Son, and Sang Do Noh, “A Conceptual Definition and Future Directions of Urban Smart Factory for Sustainable Manufacturing”, Sustainability, Vol. 14 No. 3:1221 (2022)
8. Jinho Yang, Yoo Ho Son, Donggun Lee, and Sang Do Noh, "Digital Twin-based Integrated Assessment of Flexible and Reconfigurable Automotive Part Production Lines", Machines, Vol 10, No. 2:75 (2022)
9. Chiwoo Park, Sang Do Noh, and Anuj Srivastava, “Data Science for Motion and Time Analysis with Modern Motion Sensor Data”, Operations Research, Vol. 70, No. 6, 3217-3233 (2022).
10. Kyu Tae Park, Sang Ho Lee, and Sang Do Noh, "Information fusion and systematic logic library-generation methods for self-configuration of autonomous digital twin", Journal of Intelligent Manufacturing, Vol. 33, No. 8, 2409-2439 (2022).
11. Yoo Ho Son, Goo-Young Kim, Hyeon Chan Kim, Chanmo Jun, and Sang Do Noh, “Past, Present, and Future Research of Digital Twin for Smart Manufacturing”, Journal of Computational Design and Engineering, Vol. 9, 1-23 (2022).
12. Kyu Tae Park, Seung Woo Jeon, and Sang Do Noh, "Digital twin application with horizontal coordination for reinforcement-learning-based production control in a re-entrant job shop", International Journal of Production Research, Vol. 60, Issue 7, 2151-2167 (2022).
13. Yoo Ho Son, Kyu Tae Park, Donggun Lee, Seungwoo Jeon, and Sang Do Noh, "Digital Twin-based Cyber Physical System for Automotive Body Production Lines", International Journal of Advanced Manufacturing Technology, Vol. 115, 291-310 (2021).
14. Kyu Tae Park, Yoo Ho Son, Sang Wook Ko, and Sang Do Noh "Digital Twin and Reinforcement Learning-based Resilient Production Control for Micro Smart Factory", Applied Sciences, Vol 11, No. 7, 2977 (2021).
15. Jeong Guk Min, Sang Do Noh, and Joon-Sung Yang, "Smart Manufacturing Application in 3D FinFETs: New Approach For Performance-Yield Co-optimization Based on Virtual Process Integration", Journal of Nanoscience and Nanotechnology, Vol. 21, No. 3, 1742-1747 (2021).
16. Kyu Tae Park, Yoo Ho Son, and Sang Do Noh, "The Architectural Framework of a Cyber Physical Logistics System for Digital-Twin-Based Supply Chain Control", International Journal of Production Research, Vol. 59, 5721-5742 (2021).
17. Kyu Tae Park, Jinho Yang, and Sang Do Noh, "VREDI: Virtual Representation for a Digital Twin Application in a Work-Center-Level Asset Administration Shell", Journal of Intelligent Manufacturing, Vol. 32, 501-544 (2021).
18. Kyu Tae Park, Donggun Lee, and Sang Do Noh, "Operation Procedures of a Work-Center-Level Digital Twin for Sustainable and Smart Manufacturing", International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 7, 791-814 (2020).
19. József Váncza, Sang Do Noh, and Hae‑Sung Yoon, "Preface for the Special Issue of Green Smart Manufacturing", International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 7, 545-546 (2020).
20. Kyu Tae Park, Jehun Lee, Hyun-Jung Kim, and Sang Do Noh, “Digital Twin-based Cyber Physical Production System Architectural Framework for Personalized Production”, International Journal of Advanced Manufacturing Technology, Vol. 106, No. 5-6, 1787-1810 (2020).
21. Hyoung Seok Kang, Ju Yeon Lee, and Sang Do Noh, “A dynamic processing methodology of manufacturing data for the automated throughput analysis in cyber-physical production environment”, Concurrent Engineering: Research and Applications 2019, Vol. 27(2) 155-169 (2019).
22. Kyu Tae Park, Sung Ju Im, Yong-shin Kang, Sang Do Noh, Yong Tae Kang, and Suk Gon Yang, “Service-oriented Platform for Smart Operation of Dyeing and Finishing Industry”, International Journal of Computer Integrated Manufacturing, Vol. 32, No. 3, 307-326 (2019).
23. Kyu Tae Park, Young Wook Nam, Hyeon Seung Lee, Sung Ju Im, Sang Do No, Ji Yeon Son, and Hyun Kim, “Design and Implementation of a Digital Twin Application for the Connected Micro Smart Factory”, International Journal of Computer Integrated Manufacturing, Vol. 32, No. 6, 596-614 (2019).
24. JuneHyuck Lee, Sang Do Noh, Hyun-Jung Kim, and Yong-Shin Kang, “Implementation of Cyber-Physical Production Systems for Quality Prediction and Operation Control in Metal Casting”, Sensors 18.5 (2018): 1428
25. Kyu Tae Park, Yong Tae Kang, Suk Gon Yang, Wen Bin Zhao, Yong-Shin Kang, Sung Ju Im, Dong Hyun Kim, Su Young Choi, and Sang Do Noh, “Cyber Physical Energy System for Saving Energy in Dyeing and Finishing Shops with Industrial Internet of Things and Manufacturing Big Data”, International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 7, No. 1, 219–238 (2020).
26. Chanmo Jun, Ju Yeon Lee, Bo Hyun Kim, Sang Do Noh, “Automatized Modeling of Human Engineering Simulation using KINECT”, Robotics and Computer Integrated Manufacturing, Vol. 55, Part B, pp. 259-264, February 2019.
27. Hyoung Seok Kang, Sang Do Noh, Ji Yeon Son, Hyun Kim, Jun Hee Park, Ju Yeon Lee, “The FaaS System using Additive Manufacturing for Personalized Production”, Rapid Prototyping Journal, Vol. 24 Issue: 9, pp.1486-1499, January 2018.
28. Hyoung Seok Kang, Ju Yeon Lee, Sang Su Choi, Hyun Kim, Jun Hee Park, Ji Yeon Son, Bo Hyun Kim, and Sang Do Noh, “Smart Manufacturing: Past Research, Present Findings, and Future Directions”, International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3, No. 1, PP. 111-128, January 2016.
29. Youn-Kyoung Joung, Li Quanri, and Sang Do Noh, “XML-based Neutral Schema for Automated Ergonomic Analysis with Digital Human Simulation and Inline Motion Capture”, International Journal of Computer Integrated Manufacturing, Vol. 29, No. 1, pp. 25-41, January 2016.
30. Wen-Bin Zhao, Jin-Woo Jeong, Sang Do Noh, and John T. Yee, “An Energy Simulation Framework Integrated with A Green Manufacturing-enabled PLM Information Model”, International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 2, No. 3, pp. 217-224, July 2015.
31. SangSu Choi, Bo Hyun Kim, and Sang Do Noh, “A Diagnosis and Evaluation Method for Strategic Planning and Systematic Design of a Virtual Factory in Smart Manufacturing Systems”, International Journal of Precision Engineering and Manufacturing, Vol. 16, No. 6, pp. 1107~1115, June 2015.
32. SangSu Choi, Kiwook Jung, and Sang Do Noh, “VR Application in Manufacturing Industry: Past research, present findings, and future directions”, Concurrent Engineering, Vol 23, No. 1, pp. 40-63, March 2015.
33. Youn-Kyoung Joung, and Sang Do Noh, “Integrated Modeling & Simulation with Inline Motion Captures for Automated Ergonomic Analysis in PLM”, Concurrent Engineering, Vol 22, No. 3, pp. 218-233, September 2014.
34. Hyunjei Jo, Sang Do Noh, and Yongju Cho,”An Agile Operations Management System for Green Factory”, International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 1, No. 2, pp. 131~143, April 2014.
35. Youn-Kyoung Joung, and Sang Do Noh,”Intelligent 3D Packing using a Grouping Algorithm for Automotive Container Engineering”, Journal of Computational Design and Engineering, Vol. 1, No. 2, pp. 140~151, April 2014.
36. Yooeui Jin, and Sang Do Noh,”Stochastic Model-based Framework for Assessment of Sustainable Manufacturing Technology”, International Journal of Precision Engineering and Manufacturing, Vol. 15, No. 3, pp. 519~525, March 2014.
37. Ju Yeon Lee, Hyoung Seok Kang, Sang Do Noh, “MAS2: An Integrated Modeling and Simulation-Based Life Cycle Evaluation Approach for Sustainable Manufacturing”, Journal of Cleaner Production, Vol. 66, pp. 146~163, March 2014.
38. Gun Yeon Kim, Ju Yeon Lee, Yang Ho Park, Sang Do Noh, “PLIPAM: Integrated Information and Process Analysis for Product Lifecycle Management”, Concurrent Engineering, Vol. 20, No. 4, pp. 257-274, December 2012.
39. Ju Yeon Lee, Hyoung Seok Kang, Sang Do Noh, “Simulation-based Analysis for Sustainability of Manufacturing System”, International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 7, pp. 1221-1230, July 2012.
40. Ju Yeon Lee, Hyoung Seok Kang, Gun Yeon Kim, Sang Do Noh, “Concurrent Material Flow Analysis by P3R-Driven Modeling and Simulation in PLM”, Computers in Industry, Vol. 63, No. 5, pp. 513-527, May 2012.
41. Ju Yeon Lee, Gun Yeon Kim, Sang Do Noh. "Integration Framework and PPR+ H Hub for DiFac." In Digital Factory for Human-oriented Production Systems, pp. 59-72. 2011.
42. Ju Yeon Lee, Hyoung Seok Kang, Sang Do Noh, Jong Hun Woob, Phillippe Lee, “NESIS: a neutral schema for a web-based simulation model exchange service across heterogeneous simulation software”, International Journal of Computer Integrated Manufacturing, Vol. 24, No. 10, 948-969, October 2011.
43. Ju Yeon Lee, Gun Yeon Kim, SangSu Choi, Sang Do Noh, “u-PLM: A Real-time and Integrated Engineering Environment using Ubiquitous Technology in PLM”, International Journal of Computer Integrated Manufacturing, Vol. 24, No. 7, 627–649, July 2011.
44. Yang Ho Park, Eon Lee, Seon Hwa Jeong, Gun Yeon Kim, Sang Do Noh, Cheol-woong Hwang, Sangil Youn, Hyeonnam Kim, and Hyunshik Shin, “Construction and Application of a Digital Factory for Automotive Paint Shops”, Frontiers of Assembly and Manufacturing, 227–238, October 2010.
45. Gun Yeon Kim, Ju Yeon Lee, Hyoung Seok Kang and Sang Do Noh, “Digital Factory Wizard an integrated system for concurrent digital engineering”, International Journal of Computer Integrated Manufacturing, Vol. 23, No. 11, 1028–1045, November 2010.
46. SangSu Choi, HyunJei Jo, JuYeon Lee and Sang Do Noh, “A Rule-based System for the Automated Creation of VR Data for Virtual Plant Review”, Concurrent Engineering, Vol. 18, No. 3, 165–182, March 2010.
47. Sang Su Choi, HyunJei Jo, Stefan Boehm and Sang Do Noh, “Onesview : A Integrated system for one-stop virtual design review”, Concurrent Engineering, Vol. 18, No. 1, 75–91, August 2010.
48. Sang Su Choi, Tae Hyuck Yoon and Sang Do Noh, “XML-based neutral file and PLM integrator for PPR information exchange between heterogeneous PLM systems”, International Journal of Computer Integrated Manufacturing, Vol. 23, No. 3, 216-228 March 2010.
49. Sang Su Choi, Johannes Herter, Andreas Bruening and Sang Do Noh, “MEMPHIS: New Framework for Realistic Virtual Engineering”, Concurrent Engineering Vol. 17, No. 1, pp.21-33, March 2009.
50. Yong Hoon Rim, Joung Hwan Mun, Gun Yeon Kim, Sang Do Noh, “ERGONOMIC AND BIOMECHNICAL ANALYSIS OF AUTOMOTIVE GENERAL ASSEMBLY USING XML AND DIGITAL HUMAN MODELS”, International Journal of Automotive Technology Vol. 9, No. 6, pp.719-728, December 2008.
51. Gun Yeon Kim, Sang Do Noh, Yong Hoon Rim, Joung Hwan Mun, “XML-based concurrent and integrated ergonomic analysis in PLM”, International Journal of Advanced Manufacturing Technology Vol. 39, No. 9-10, pp.1045-1060, November 2008.
52. Gibom Kim, Sang Do Noh, Young-Geun Han, “Collaborative Process Planning and Flow Analysis for Automotive Assembly Shops”, International Journal of Automotive Technology, Vol. 7, No. 2, pp. 217-226, February 2006.
53. Sang Hoon Kong, Sang Do Noh, Young-Geun Han, Gibom Kim, Kyo Il Lee, “Agent-based Collaborative Assembly Process Planning System”, International Journal of Advanced Manufacturing Technology, 2006, Vol. 28, No. 1-2, pp. 176-183, February 2006.
54. Sang Do Noh, Young-jin Park, Sang Hoon Kong, Young-Geun Han, Gibom Kim, Kyo Il Lee, “Concurrent and Collaborative Process Planning for Automotive General Assembly”, International Journal of Advanced Manufacturing Technology Vol. 26, No. 5, pp.572-584, September 2005.
55. Sang Do Noh, “Digital Manufacturing – a Strategy for Engineering Collaboration”, Journal of Ship and Ocean Technology Vol. 8, No. 4, pp. 1-10, 1st, December 2004.
56. Dongmok Sheen, Chang Ho Lee, Sang Do Noh and Kiwoo Lee, “Process planning and NC-code generation in manufacturing of press dies for production of car bodies”, International Journal of Production Research, 2004, Vol. 42, No. 1, pp. 37-49, January 2004.
57. Sang Hoon Kong, Sang Do Noh, Young-Geun Han, Gibom Kim, Kyo Il Lee, “Internet-based Collaboration System – Press-Die Design Process for Automobile Manufacturer”, International Journal of Advanced Manufacturing Technology, 2002, 20, pp. 701-708, November 2002.
58. Dongmok Sheen, Chang Ho Lee, Sang Do Noh, and Kiwoo Lee, “A Process Planning System for Machining of Dies for Auto-Body Production – Operation Planning and NC Code Post-Processing”, International Journal of KSPE, Vol. 2, No. 3, September 2001.
59. K. Lee, Sang Do Noh and K. Roh, “Integrated Scgeduling System for Virtual Manufacturing”, Manufacturing Systems, Vol. 27, No. 3, pp. 283-288, 1998.
60. K. I. Lee and Sang Do Noh, “Virtual Manufacturing System – a Test-Bed of Engineering Activities”, Annals of the CIRP, Vol. 46/1/1997, pp. 347-350, 1997.
Domestic
1. 윤종필, 김구영, 이창하, 마흐디, 노상도, “공정과 작업자 특성을 고려한 데이터 기반 작업자 배치 최적화”, 한국 CDE 학회 논문집, 제28권 3호, pp.165-177. 2023년 9월
Jongpil Yun, Goo-Young Kim, Changha Lee, Seyed Mohammad Mehdi Sajadieh, and Sangdo Noh, "Optimized Assignment of Workers Considering Process Difficulty and Worker’s Differences Using Shop Floor Data", Korean Journal of Computational Design and Engineering, Vol.28, No. 3, pp. 165-177. September 2023
2. 최종환, 양진호, 임주희, 노상도, 이상현, 강정태, 김형선, “자동차 부품 생산라인을 위한 CPS 플랫폼과 디지털트윈 개발 및 적용”, 한국 CDE 학회 논문집, 제26권 4호, pp.285-298. 2021년 12월
Jonghwan Choi, Jinho Yang, Joohee Lym, Sang Do Noh, Sang Hyun Lee, Jeong Tae Kang, Dae Yub Lee, and Hyung Sun Kim, “Development of a CPS Platform and Digital Twin Applications for Production Lines of Automotive Parts”, Korean Journal of Computational Design and Engineering, Vol.26, No. 4, pp. 285-298. December 2021
3. 이동건, 송승현, 이찬혁, 노상도, 윤상문, 이현영, “자동물류시스템의 설계 검증 및 운영을 위한 디지털트윈 개발 및 적용”, 한국 CDE 학회 논문집, 제26권 4호, pp.313-323. 2021년 12월
Donggun Lee, Seunghyun Song, Chanhyeok Lee, Sang Do Noh, Sangmun Yun, and Hyeonyeong Lee, “Development and Application of Digital Twin for the Design Verification and Operation Management of Automated Material Handling Systems”, Korean Journal of Computational Design and Engineering, Vol.26, No. 4, pp.313-323. December 2021
4. 양진호, 손유호, 이동건, 노상도, 김현남, 이종수, 김영수, 원영규, “가변유연조립 스마트공장을 위한 가변형 지그”, 대한산업공학회 논문집, 제47권 제1호, pp.102-116. 2021년 2월
Jinho Yang, Yoo Ho Son, Donggun Lee, Sang Do Noh, Hyeonnam Kim, Jong Su Lee, Young Soo Kim, and Youngkyu Won, “A Flexible Jig for Reconfigurable and Flexible Assembly of Smart Factory”, Journal of the Korean Institute of Industrial Engineers, Vol. 47, No. 1, pp.102-116, February 2021
5. 김현찬, 손유호, 배지현, 노상도, “염색가공 스마트공장 사이버물리시스템을 위한 디지털트윈 가시화 방안 연구”, 대한산업공학회 논문집, 제47권 제1호, pp.77-91. 2021년 2월
Hyeon Chan Kim, Yoo Ho Son, Jihyun Bae, and Sang Do Noh, “A Study on the Digital Twin Visualization Method for Smart Factory of Dye Processing Industry”, Journal of the Korean Institute of Industrial Engineers, Vol. 47, No. 1, pp. 077-091, February 2021
6. 남영욱, 이상호, 이동건, 임성주, 노상도, "사람-기계 협업 공장 설계 지원을 위한 디지털트윈 기반 애플리케이션", 대한산업공학회 논문집, 제46권 제1호, pp.42-54. 2020년 2월
Youngwook Nam, Sangho Lee, Donggun Lee, Sungju Im, and Sang Do Noh, "Digital Twin-based Application for Design of Human-Machine Collaborative Assembly Production Lines", Journal of the Korean Institute of Industrial Engineers, Vol. 46, No. 1, pp. 042-054, February 2020
7. 박규태, 강용신, 임성주, 노상도, 양석곤, 강용태, 염색가공 산업의 에너지 효율 향상을 위한 디지털트윈과 가상표현의 구현, 대한산업공학회지, 제45권 제6호, pp.491-502. 2019년 12월
Kyu Tae Park, Yong-Shin Kang, Sung Ju Im, Sang Do Noh, Suk Gon Yang, and Yong Tae Kang, “Implementation of Digital Twin and Virtual Representation for Energy Efficiency Improvement of Dyeing and Finishing Industry, Journal of the Korean Institute of Industrial Engineers, , Vol. 45, No. 6, pp. 042-054, December 2019
8. 남영욱, 임성주, 이동건, 노상도, "공정설계와 생산운영을 위한 작업자 사이버물리시스템", 한국 CDE학회논문집, 제24권 제4호, pp.442-451. 2019년 12월.
Youngwook Nam, Sungjoo Im, Donggun Lee, and Sand Do Noh, "Cyber physical system of workers for process design and production operation", Korean Journal of Computational Design and Engineering, Vol.24, No. 4, pp.442-451. December 2019.
9. 이상호, 박서현, 양진호, 손유호, 고명준, 임종완, 공현웅, 정영준, 김선홍, 노상도, 손지연, 전영애, “자동차 모듈 조립라인의 모델링 & 시뮬레이션 기반 가변성/생산성 통합 평가에 관한 연구”, 한국CDE학회논문집, 제24권 제3호, pp.233-247. 2019년 9월.
Sangho Lee, Seohyeon park, Jinho Yang, Yoo Ho Son, Myoung Jun Ko, Jong Wan Lim, Hyunwoong Kong, Youngjun Jung, Sunhong Kim, Sang Do Noh, Ji Yeon Son, and Youngae Jeon, “Modeling & Simulation-based Assessments of Reconfigurability and Productivity for Automotive Module Assembly Lines”, Korean Journal of Computational Design and Engineering, Vol.24, No. 3, pp.233-247. September 2019.
10. 이현승, 양진호, 노상도, 박용제, "자동차 조립 라인의 병목공정을 고려한 실시간 적정 차량 투입순서 결정에 관한 연구", 한국CDE학회논문집, 제24권 제1호, pp.30-38. 2019년 3월.
Hyeon Seung Lee, Jinho Yang, Sang Do Noh, and Yong Je Park, "A Study on the Determination of Real Time Proper Vehicle Input Order Considering the Bottleneck Process of Automobile Assembly Line", Korean Journal of Computational Design and Engineering, Vol.24, No. 1, pp.30-38. March 2019.
11. 황다혜, 양진호, 권혁진, 김보현, 노상도, "3D CAD 모델 기반 조립성 및 조립비용 분석설계 지원시스템에 관한 연구", 한국CDE학회논문집, 제23권 제4호, pp. 307-319. 2018년 12월.
Dahye Hwang, Jinho Yang, Hyeokjin Kwon, Bohyun Kim, and Sang Do Noh, "Research on Design-support System of Assemblability and Cost Analysis Using 3D CAD Models", Korean Journal of Computational Design and Engineering, Vol.23, No. 4, pp. 307-319. December 2018.
12. 박규태, 임성주, 강용신, 노상도, 양석곤, 강용태, 김동현, 최수영, " 염색가공 공장의 에너지 효율 향상을 위한 디지털트윈 구성 및 활용", 한국CDE학회논문집, 제23권 제4호, pp. 329-341. 2018년 12월.
Kyu Tae Park, Sung Ju Im, Yong-shin Kang, Sang Do Noh, Suk Gon Yang, Yong Tae Kang, Dong Hyun Kim, and Su Young Choi, "The Configuration and Utilization of Digital Twin for the Energy Efficiency Improvement of the Dyeing and Finishing Shop", Korean Journal of Computational Design and Engineering, Vol.23, No. 4, pp. 329-341. December 2018.
13. 황다혜, 김승현, 이상현, 강정태, 노상도. "자동차 부품 제조라인의 생산, 품질 이력 3D 가시화 시스템에 관한 연구", 한국CDE학회 논문집, 제23권 제4호, pp. 404-413 2018년 12월.
Dahye Hwang, Seunghyeon Kim, Sanghyun Lee, Jeongtae Kang, and Sang Do Noh, "A Study on 3D based Visualization System of Production and Quality History for an Automotive Parts Supplier", Korean Journal of Computational Design and Engineering, Vol.23, No. 4, pp.404-413, December 2018.
14. 박규태, 양석곤, 박희진, 조문빈, 강용신, 노상도, 김동현, 최수영, 강용태, “염색가공 산업의 에너지 효율화를 위한 제조현장 빅데이터 활용에 관한 연구”, 한국CDE학회 논문집, 제22권 제4호, pp. 435-444. 2017년 12월.
Kyu Tae Park, Suk Gon Yang, Hee Jin Park, Wen Bin Zhao, Yong Shin Kang, Sang Do Noh, Dong Hyun Kim, Su Young Choi, and Yong Tae Kang, “A Study on Utilization of Manufacturing Big Data for Energy Efficiency of Dyeing-Finishing Industry”, Korean Journal of Computational Design and Engineering, Vol. 22, No. 4, pp. 435-444. December 2017.
15. 전찬모, 이주연, 노상도, “여러 대의 키넥트 뎁스 카메라를 이용한 인간공학 시뮬레이션 모델링 자동화에 관한 연구”, 한국CDE학회 논문집, 21권 1호, pp. 9-19. 2016년 3월.
Chanmo Jun, Ju Yeon Lee, and Sang Do Noh, “A Study on Modeling Automation of Human Engineering Simulation Using Multi Kinect Depth Cameras”, Transactions of the Society of CAD/CAM Engineers, Vol. 21, No. 1, pp. 9-19. March 2016
16. 최상수, 성낙윤, 신연식, 노상도, “제조라인 통합 설계 및 분석 (II) – 디지털 가상생산 기술 적용을 통한 지속적인 라인 설계, 분석 및 최적화 프로세스”, 한국 CAD/CAM 학회 논문집, 제19권 제2호, pp. 148-156, 2014년 6월.
SangSu Choi, Nakyun Sung, Yeonsik Shin, and Sang Do Noh, “The integrated design and analysis system of manufacturing line (II) – Continuous Design, Analysis and Optimization through Digital Virtual Manufacturing”, Transactions of the Society of CAD/CAM Engineers, Vol. 19, No. 2, pp. 148-156, June 2014.
17. 최상수, 현정호, 장용, 이범기, 박양호, 강형석, 전찬모, 정진우, 노상도, “제조라인 통합 설계 및 분석(I) – 디지털 가상생산 기술 적용을 위한 모델링 &시뮬레이션 자동화 시스템”, 한국 CAD/CAM 학회 논문집, 제19권 제2호, pp. 138-147, 2014년 6월.
SangSu Choi, Jeongho Hyeon, Yong Jang, Bumgee Lee, Yangho Park, HyoungSeok Kang, Chanmo Jun, Jinwoo Jung, and Sang Do Noh, “The integrated design and analysis of manufacturing line (I) – Digital Virtual Manufacturing based on Automated Modeling &Simulation System”, Transactions of the Society of CAD/CAM Engineers, Vol. 19, No. 2, pp. 138-147, June 2014.
18. 이언, 정진우, 조문빈, 노상도, “EnergyPlus와 PSO알고리즘을 이용한 제조플랜트 냉난방/공조시스템의 최적 운영에 관한 연구”, 한국 CAD/CAM 학회 논문집, 제18권 제2호, pp. 1-9, 2013년 4월.
Eon Lee, Jin Woo Jeong, Wen Bin Zhao, and Sang Do Noh, “A Study on the Effective Operation of HVAC Systems on Manufacturing Plants by EnergyPlus and PSO Algorithm”, Transactions of the Society of CAD/CAM Engineers, vol.18, No.2, pp.1-9, April 2013.
19. 정연경, 조문빈, 이전일, 노상도, 조현재, 조용주, 최석우, “중소 제조기업의 생산정보화(MES) 도입 전략에 관한 연구 (II) – 룰 베이스를 이용한 맞춤형 도입 가이드라인”, 한국정밀공학회지, Vol. 30, No. 2, pp. 206-215, 2013년 2월.
Youn-Kyoung Joung, Wen-Bin Zhao, Quanri Li, Sang Do Noh, Hyunjei Jo, Yong Ju Jo, Seog Ou Choi, “A Study on the Production Informatization Strategy for Korean SMEs of Manufacturing Industries (II) – Customized Guideline for Introduction of Production Information System using Rule-base”, Journal of the Korean Society for Precision Engineering, Vol. 30, No. 2, pp. 206-215, February 2013.
20. 이주연, 조문빈, 박양호, 이언, 노상도, 조현재, 조용주, 최석우, “중소 제조기업의 생산정보화(MES) 도입 전략에 관한 연구 (I) – 생산정보화 수준 진단 및 평가”, 한국정밀공학회지, Vol. 30, No. 2, pp. 194-205, 2013년 2월.
Ju Yeon Lee, Wen-Bin Zhao, Yang Ho Park, Eon Lee, Sang Do Noh, Hyunjei Jo, Yong Ju Jo, Seog Ou Choi, “A Study on the Production Informatization Strategy for Korean SMEs of Manufacturing Industries (I) – Evaluation of Production Informatization Level”, Journal of the Korean Society for Precision Engineering, Vol. 30, No. 2, pp. 194-205, February 2013.
21. 이상석, 양태호, 이덕희, 오석찬, 노상도, “규칙 기반 추론을 이용한 이기종 시스템 간의 제품 정보 상호운용에 관한 연구”, IE Interfaces, Vol. 24, No. 3, pp. 248-256, 2011년 9월.
Sang Seok Lee, Tae Ho Yang, Duk Hee Lee, Seog-chan Oh, Sang Do Noh, “A Study on the Product Information Interoperability between Heterogeneous Systems using Rule-based Reasoning”, IE Interfaces, Vol. 24, No. 3, pp. 248-256, September 2011.
22. 김건연, 진유의, 노상도, 최상수, 조용주, 최석우 “BPR 방법론에 기반한 중소 PCB 제조업체의 MES 구축 전략과 효과분석”, IE Interfaces, Vol. 24, No. 3, pp. 231-240, 2011년 9월.
Gun Yeon Kim, Yoo Eui Jin, Sang Do Noh, Sangsu Choi, Yong Ju Jo, Seog Ou Choi, “Implementation Strategy and Effect Analysis of MES for a Small and Medium PCB Production Company based on BPR Methodology”, IE Interfaces, Vol. 24, No. 3, pp. 231-240, September 2011.
23. 이주연, 최상수, 박양호, 노상도, “P3R 정보 기반의 가상현실 모델을 이용한 공장 품평에 관한 연구”, 한국 CAD/CAM 학회 논문집, 제15권 제5호 pp. 343-353, 2010년 10월.
Ju Yeon Lee, Sangsu Choi, Yang Ho Park, Sang Do Noh, “A Study on Factory Review Using Virtual Reality Model based on P3R Information”, Transactions of the Society of CAD/CAM Engineers, vol.15, No.5 pp.343-353, April 2010.
24. 강형석, 이상석, 노상도, 이광명, “C-PLM: 토목 프로젝트 관리를 위한 PLM 시스템 설게 및 구축”, 한국CAD/CAM학회 논문집, vol.15, No.2 pp.124-135, 2010년 4월.
Hyung seok Kang, Sang Seok Lee, Sang Do Noh, Kwang Myung Lee, “C-PLM: Design and Implementation of a PLM System for Effective Management of Civil Projects”, Transactions of the Society of CAD/CAM Engineers, vol.15, No.2 pp.124-135, April 2010.
25. 양태호, 최상수, 김건연, 이인석, 김욱태, 노상도, “사례기반추론을 이용한 금형 트라이아웃 보고서 작성시스템”, IE Interfaces, vol.23, No.1 pp.48~57, 2010년 3월.
Tae Ho Yang, Sang Su Choi, Gun Yeon Kim, In Seok Lee, Wook Tae Kim, Sang Do Noh, “A Tryout Report System of Press Dies using Case-Based Reasoning”, IE Interfaces, vol.23, No.1 pp.48~57, March 2010.
26. 최상수, 양태호, 노상도, 진희주, 이용한, 이인석, 권성오 “유비쿼터스 기술을 이용한 프레스 금형의 트라이아웃 관리시스템”, CAD/CAM학회 논문집, vol.14, No.5 pp.314~322, 2009년 10월.
SangSu Choi, TaeHo Yang, Sang Do Noh HeeJu Jin, Yong-Han Lee, Inseok lee, Sungoh Kwon, “Tryout Management System for Press Dies Production using Ubiquitous Technology”, Transactions of the Society of CAD/CAM Engineers, vol.14, No.5 pp.314~322, October 2009.
27. 최상수, 조현제, 노상도, “실감형 가상 시작품을 이용한 협업 디자인 품평”, CAD/CAM학회 논문집, vol.14, No.3 pp.150~158, 2009년 6월.
SangSu Choi, HyunJei Jo, Sang Do Noh, “Collaboration Design Review Using Realistic Virtual Prototype”, Transactions of the Society of CAD/CAM Engineers, vol.14, No.3 pp.150~158, June 2009.
28. 김영진, 노상도, 문정환, “시뮬레이션 모델 구축과 분석을 통한 솔레노이드 생산라인의 최적 버퍼 할당”, 한국시뮬레이션 학회 논문집, Vol. 17, No. 4, pp. 1-10, 2008년 12월.
Young-Jin Kim, Sang Do Noh, Joung H. Mun, “Optimal buffer allocation of the solenoid production line using simulation”, The Korea Society for Simulation, Vol. 17, No. 4, pp. 1-10, December 2008.
29. 채수진, 노상도, “문제중심학습과 산업체 현장실습 연계를 통한 효과적인 PLM 교육에 관한 연구”, 한국CAD/CAM학회 논문집, Vol. 13, No. 5, pp. 362-371, 2008년 10월.
Su-jin Chae, Sang Do Noh, “A Study on the Problem-Based Learning with Industry Co-operative Program for Effective PLM Education”, Transactions of the Society of CAD/CAM Engineers, Vol. 13, No. 5, pp. 362-371, October 2008.
30. 국승호, 이상석, 소순일, 노상도, 김희선, 심경보, 김주열, “자동차 가상생산 기술 적용(Ⅶ) : 프레스 디지털 가상공장의 구축과 활용”, IE interfaces, Vol. 21, No. 3, pp. 323-333, 2008년 9월.
Seung Ho Kuk, Sang Seok Lee, Soon Il So, Sang Do Noh, H. S. Kim, K. B. Shim, J. Y. Kim, “Virtual Manufacturing for an Automotive Company(Ⅶ) : Construction and Application of a Virtual Press Shop”, IE Interfaces, Vol. 21, No. 3, pp. 323-333, September 2008.
31. 양태호, 윤태혁, 최상수, 노상도, “상용PDM을 포함한 이기종 시스템 간의 제품정보 교환에 관한 연구”, 한국CAD/CAM학회 논문집, Vol. 13, No. 3, pp. 175-186, 2008년 6월.
Tae Ho Yang, Tae Hyuck Yoon, Sang Su Choi, Sang Do Noh, “A Study on Product Information Exchange between Heterogeneous Systems including Commercial PDM Systems”, Transactions of the Society of CAD/CAM Engineers, Vol. 13, No. 3, pp. 175-186, June 2008.
32. 이강걸, 강형석, 노상도, “자동차 가상생산 기술 적용(Ⅵ) : 디지털 가상공장을 이용한 조립공장 자재배치 및 검토”, IE interfaces, Vol. 21, No. 1, pp. 131-140, 2008년 3월.
Kang Gul Lee, Hyoung Seok Kang, Sang Do Noh, “Virtual Manufacturing for an Automotive Company(Ⅵ) : Material Addressing and Analysis using Digital Virtual Factory for General Assembly Shop”, IE Interfaces, Vol. 21, No. 1, pp. 131-140, March 2008.
33. 한상동, 신종계, 윤태혁, 김유석, 김건연, 노상도, “조선 형강 디지털 가상공장 구축 및 활용”, 한국CADCAM학회 논문집, Vol. 13, No. 1, pp. 27-35, 2008년 2월.
Sang Dong Han, Jong Gye Shin, Tae Hyuck Yoon, Yu Seok Kim, Gun Yeon Kim, Sang Do Noh “Construction and Applications of Digital Virtual Factory for Section-steel Shop in Shipbuilding Company”, Transactions of the Society of CAD/CAM Engineers, Vol. 13, No. 1, pp. 27-35, February 2008.
34. 김건연, 노상도, 이인석, 송명환, “자동차 금형 생산을 위한 PPR정보 관리”, 한국CAD/CAM학회 논문집, Vol. 12, No. 6, pp. 452-460, 2007년 12월.
Gun Yeon Kim, Sang Do Noh, In Seok Lee, Myeong Hwan Song, “PPR Information Managements for Manufacturing of Automotive Press Dies”, Transactions of the Society of CAD/CAM Engineers, Vol. 12, No. 6, pp. 452-460, December 2007.
35. 김유석, 강형석, 노상도, “분류 및 코딩시스템을 이용한 디지털 가상공장 객체의 효율적 관리”, 한국CAD/CAM학회 논문집, Vol. 12, No. 5, pp. 382-394, 2007년 10월.
Yu Seok Kim, Hyoung Seok Kang, Sang Do Noh, “The Efficient Management of Digital Virtual Factory Objects Using Classification and Coding System”, Transactions of the Society of CAD/CAM Engineers, Vol. 12, No. 5, pp. 382-394, October 2007.
36. 채수진, 노상도, “산업체 현장실습과 연계된 문제중심학습 개발 및 적용 사례”, 교육과정연구, Vol. 24, No. 4, pp. 131-151, 2006년.
Su Jin Chae and Sang Do Noh, “The Development and the Application of Problem Based Learning Linked to industry Field Training”, 교육과정연구, Vol. 24, No. 4, pp. 131-151, 2006.
37. 이강걸, 노상도, 이인석, 송명환, “웹과 모바일 기술을 이용한 프레스 금형의 불량관리에 관한 연구”, IE interfaces, Vol. 18, No. 1, pp. 88-93, 2005년 3월.
Kang Gul Lee, Sang Do Noh, In Seok Lee, Myeong Hwan Song, “The Fault Management of Press Dies using Web and Mobile Technologies”, IE Interfaces, Vol. 18, No. 1, pp. 88-93, March 2005.
38. 박태근, 김건연, 노상도, 박영진, “자동차 가상생산 기술 적용(V) – 객체지향방법에 의한 디지털 조립공장의 파라메트릭 모델링”, IE interfaces, Vol. 18, No. 1, pp. 94-103, 2005년 3월.
Tae Keun Park, Gun Yeon Kim, Sang Do Noh, Young Jin Park, “Virtual Manufacturing for an Automotive Company(V) – Parametric Modeling of the Digital General Assembly Shop using Object-Oriented Methods”, IE Interfaces, Vol. 18, No. 1, pp. 94-103, March 2005.
39. 김건연, 이강걸, 허 준, 박태근, 노상도, 김정호, 김동욱, “자동차 조립공장의 생산 DMU 적용에 관한 연구”, 2005년도 한국자동차공학회 논문집, Vol. 13, No. 2, pp. 162-169, 2005년 3월.
Gun Yeon Kim, Kang Kul Lee, Jun Heo, Tae Keun Park, “A Study on the Manufacturing DMU for Automotive General Assembly”, Transactions of the Korean Society of Automotive Engineers, Vol. 13, No. 2, pp. 162-169, March 2005.
40. 노상도, 박영진, “디지털공장을 이용한 자동차 조립공장의 자재계획 및 정보관리”, 한국CADCAM학회 논문집, 제9권 제4호, pp. 325-333, 2004년 12월 1일.
Sang Do Noh, Young-Jin Park, “Material Planning and Information Management for Automotive General Assembly using Digital Factory”, to be published on Transactions of the Society of CAD/CAM Engineers.
41. 허준, 이강걸, 노상도, 박영진, “자동차 조립공장을 위한 Web기반 협업 공정 및 자재 계획”, 한국자동차공학회논문집, 제12권 제4호, pp. 198-206, 2004년 8월.
Jun Heo, Kang Kul Lee, Sang Do Noh, Young-Jin Park, “Web-based Collaborative Process and Material Planning for Automotive General Assembly”, Transaction of KSAE, Vol. 12, No. 4, pp. 198-206, November 2003.
42. 노상도, 박영진, “차체공장 디지털생산 기술 적용을 통한 신차 개발 생산준비 업무 수행”, 한국자동차공학회논문집, 제11권 제6호, pp. 118-126, 2003년 11월.
Sang Do Noh, Young-Jin Park, “Manufacturing Preparations in the New Car Development for an Automotive Body Shop by Digital Manufacturing Technologies”, Transaction of KSAE, Vol. 11, No. 6, pp. 118-126, November 2003.
43. 노상도, 박영진, 공상훈, 이교일, “자동차 조립 공정계획을 위한 Web기반 협업시스템”, IE Interface, 제16권 제3호, pp. 375-381, 2003년 9월.
Sang Do Noh, Young-Jin Park, Sang Hoon Kong, Kyo Il Lee, “Web-based Collaborative Process Planning System for the Automotive General Assembly Shop”, IE Interfaces, Vol. 16, No. 3, pp. 375-381, September 2003.
44. 노상도, 안현식, 박영진, “자동차 가상생산 기술 적용(Ⅳ)－ 가상공장 정보 관리”, IE Interface, 제16권 제1호, pp. 63-69, 2003년 3월.
Sang Do Noh, Hyeon Sik Ahn, Young-jin Park, “Virtual Manufacturing for an Automotive Company(Ⅳ)－Information Management for a Virtual Factory”, IE Interfaces, Vol. 16, No. 1, pp. 63-69, March 2003.
45. 노상도, 김덕영, 박영진, “자동차 가상생산 기술 적용(III)-가상도장공장 구축 및 운영”, IE Interface, 제15권 제4호, pp. 356-363, 2002년 12월.
Sang Do Noh, Duck Young Kim, Young-jin Park, “Virtual Manufacturing for an Automotive Company(III) – Construction and Operation of a Virtual Paint Shop”, IE Interfaces, Vol. 15, No. 4, pp. 356-363, December 2002.
46. 노상도, 이교일, 손창영, 한형상, 박영진, “가상생산기술 적용을 위한 자동차 가상플랜트 구축 및 활용”, 대한기계학회논문집, 제25권 제10호, pp. 1627-1635, 2001년 10월.
Sang Do Noh, Kyo Il Lee, Changyoung Sohn, Hyung Sang Hahn and Young-jin Park, “Construction and Applications of the Virtual Automotive Plant for a Virtual Manufacturing”, Trans. on the Korean Society of Mechanical Engineers, Vol. 25, No. 10, pp. 1627-1635, October 2001.
47. 노상도, 홍성원, 김덕영, 손창영, 한형상, “자동차 가상생산기술 적용(II) – 차체공장 가상플랜트 구축 및 운영”, IE Interface, 제14권 제2호, pp. 127-133, 2001년 6월.
Sang Do Noh, Sung Won Hong, Duck Young Kim, Chang Young Sohn and Hyung Sang Hahn, “Virtual Manufacturing for an Automotive Company(II) – Construction and Operation of a Virtual Body Shop”, IE Interfaces, Vol. 14, No. 2, pp. 127-133, June 2001.
48. 노상도, 이창호, 한형상, “자동차 가상생산기술 적용(I) – 생산준비 업무분석 및 적용 전략 수립”, IE Interface, 제14권 제2호, pp. 120-126, 2001년 6월.
Sang Do Noh, Chang Ho Lee and Hyung Sang Hahn, “Virtual Manufacturing for an Automotive Company(I) – Workflow Analysis and Strategic Planning of Manufacturing Preparation Activities Construction and Operation of a Virtual Body Shop”, IE Interfaces, Vol. 14, No. 2, pp. 120-126, June 2001.
49. 신동목, 이창호, 최재진, 노상도, 이기우, “자동차 차체금형 가공용 공정계획 시스템(II) – 작업계획과 NC 코드 후처리”, 한국정밀공학회지, 제18권 제1호, pp. 63-73, 2001년 1월.
Dongmok Sheen, Chang Ho Lee, Jae Jin Choi, Sang Do Noh and Kiwoo Lee, “A Process Planning System for Machining of Dies for Auto-Body Production(II) – Operation Planning and NC Code Post-Processing”, Trans. on the Korean Society of Precision Engineering, Vol. 18, No. 1, pp. 63-73, January 2001.
50. 이기우, 노상도, 신동목, 한형상, “절삭부하 예측을 통한 NC코드 후처리시스템”, 한국정밀공학회지, 제17권 제5호, pp. 116-123, 2000년 5월.
Ki Woo Lee, Sang Do Noh, Dongmok Sheen and Hyung Sang Hahn, “NC Code Post-Processor Considering Metal Removal Rate”, Trans. on the Korean Society of Precision Engineering, Vol. 17, No. 5, pp. 116-123, May 2000.
51. 이교일, 이홍희, 노상도, 심영보, 조현수, “군분류 기술과 룰베이스를 이용한 공정계획시스템”, IE Interface, 제8권 제3호, pp. 221-230, 1995년 3월.
Kyo Il Lee, Hong Hee Lee, Sang Do Noh, Young Bo Shim and Hyun Soo Cho, “A Process Planning System Using Group Technology and Rule Base”, IE Interfaces, Vol. 8, No. 3, pp. 221-230, March 1995.